142
11. Press the arrow buttons on the projector or remote control to adjust the image shape.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
12. Repeat the previous two steps as necessary to adjust other image areas.
13. If the image expands or contracts, press the Esc button to return to the Corner Wall screen so you
can adjust the linearity.
14. Select one of the following to adjust the linearity:
• Horizontal Corner: Adjusts horizontal expansion or contraction.
• Vertical Corner: Adjusts vertical expansion or contraction.
15. Adjust the linearity so that all of the lines are the same distance apart by doing one of the following:
• Press the left arrow button to contract the distance between the lines closest to the baseline.
To Next Page
Loading...
