182
You cannot use this feature in any of the following conditions:
• You are using the E-Zoom feature
• The image signal exceeds WUXGA
• You turned on the 4K Enhancement, Edge Blending, or Scale settings
You cannot use this feature in any of the following conditions:
• The input signal exceeds 1920 in horizontal resolution
• You selected V-Zoom as the Aspect setting
• You turned on the 4K Enhancement, Edge Blending or Scale settings
• You selected Off as the Image Preset Mode setting
1. Press the Menu button.
You see a screen like this:
2. Select the Image Enhancement setting and press Enter.
3. Select the Frame Interpolation setting and press Enter.
To Next Page
Loading...
