211
5. Select Start Auto Adjustment press Enter.
When adjustment starts, you see an adjustment pattern. Adjustment is complete when you see a
displayed image.
After automatic adjustment, the Color Uniformity and Color Matching settings are returned to their
default values. The Light Source Control setting is set to Off.
Parent topic: Matching Tint and Brightness (Screen Matching)
Related references
Image Quality Settings - Image Menu
Projector Parts - Front/Top
Related tasks
Changing the Color Mode
Configuring Tiling Automatically
Blending the Image Edges
Matching the Screens Manually
You can manually correct the brightness and tint for multiple projectors.
Note: We recommend that you reset the following settings on the Image menu before beginning manual
screen matching: Brightness, Contrast, Color Saturation, Tint, White Balance (all settings), Gamma,
and RGBCMY.
1. Press the Menu button.
To Next Page
Loading...
