Epson ProSense 17 - Checking the Firmware Version of Your Watch

70
2. Press the Up or Down button to select Settings > System > Reset > Yes.
Your watch resets. When it is finished, it restarts and displays the Language screen.
3. Now you can configure your watch again.
Parent topic: Solving Problems
Related references
Time Screen Menus
Checking the Firmware Version of Your Watch
You can check the firmware version of your watch by displaying it on the watch screen.
1. Press the Enter button.
You see this screen:
2. Press the Up or Down button to select Settings > System > Ver. Info.
Your watch screen displays the firmware version information.
3. Press and hold the Back button for at least 2 seconds to return to the Time screen.
Parent topic: Solving Problems