Epson R200 - Stylus Photo Color Inkjet Printer - 2.3 Disassembly Procedure Flowchart

EPSON Stylus Photo R200/R210 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 36
2.3 Disassembly
The following flowchart shows the order of disassembling procedure. When disassembling any unit, refer to the page number shown in the flowchart.
Figure 2-1. Disassembly Procedure Flowchart
Start
Paper Suuport Assy./Housing (right/left)/
Stacker Assy. removal （2.3.1P.37）
Housing (frame)/Panel Assy./Panel
Board removal (2.3.2P.39）
ASF Unit removal
（2.3.3P.40）
CR Motor removal
（2.3.4P.42）
Holder, Shaft Unit removal
（2.3.8P.46）
Main Board removal
（2.3.7P.45）
Main Board removal
（2.3.7P.45）
APG Unit removal
（2.3.9P.49）
CR Unit removal
（2.3.11P.51）
PF Motor removal
（2.3.17P.71）
CDR Guide Assy. removal
（2.3.14P.62）
Ink System Unit removal
（2.3.15P.64）
Paper Guide, Front/Roller, EJ Assy. removal
（2.3.16P.67）
Printer Mechanism/Housing (lower)
removal（2.3.12P.57）
P/S Board Unit removal
（2.3.13P.61）
Paper Guide, Upper removal
（2.3.10P.50）
Print Head removal
（2.3.5P.43）
Porous Pad, Paper Guide, Front
removal （2.3.6P.44）
Print Head removal
（2.3.5P.43）
NOTE: indicates that the procedure in the broken-line box is NOT the shortest
removing procedure, but the passing point for the next removing procedure.
NOTE: When removing ’CDR Guide Assy.’ or ’Paper Guide, Front/ Roller EJ Assy.’, We
have to remove Carriage Unit before removing Printer Mechanism.