Print With Adobe Photoshop 7
12. For the
Rendering Intent setting, select Relative Colorimetric.
Note:
If your image contains very saturated colors, select Perceptual. This reduces the
color saturation so that the colors fit within the printer’s color gamut.
13. Select the Black Point Compensation checkbox.
14. Click the
Print button.
Follow the steps in the next section to select print settings to match the profile and
print.
Print Your Color-Managed Photo
1. Make sure the EPSON Stylus Photo R2880 is selected, then click the
Preferences or Properties button.
2. Select the
Source and Media Type settings for the paper you’ll use for the
print.
3. Select
Quality Options as the Print Quality setting.
You see a window like this one:
4. If you are using an Epson Premium ICC profile, set the
Print Quality setting
to match your profile.
5. Turn off the
High Speed and Edge Smoothing options, if they are
available, then click
OK to close the Quality Options window.
To Next Page
Loading...
