Installation 4. First Step
72 RC700 Series Rev.3
8. Backup the project and system configuration
Even though this is only a sample project, we will backup the project and Controller
configuration. Backup can be done easily with EPSON RC+ 7.0. It is important that
you keep regular backups of your applications on an external media such as a USB
memory key.
Follow the steps below to back up the project and system configuration:
(1) Select the EPSON RC+ 7.0 menu - [Project] - [Copy].
(2) Change the [Destination Drive] to an arbitrary drive.
(3) Click <OK>. The project will be copied to the external media.
(4) Select the EPSON RC+ 7.0 menu - [Tools] - [Controller].
(5) Click on the <Backup Controller> button.
(6) Select the arbitrary drive.
(7) Click <OK>. The system configuration will be backed up on the external media.
To Next Page
Loading...
