Page 6
Epson Research and Development
Vancouver Design Center
S1D13706 Linux Console Driver
X31B-E-004-02 Issue Date: 01/09/19
7. Boot to the Linux operating system
If you are using lilo (Linux Loader), modify the lilo configuration file as discussed in
the kernel build README file. If there were no errors during the build, from the com-
mand prompt run:
lilo
and reboot your system.
Note
In order to use the S1D13706 console driver with X server, you need to configure the X
server to use the FBDEV device. A good place to look for the necessary files and in-
structions on this process is on the Internet at www.xfree86.org
To Next Page
Loading...
