Head cleaning procedure
Buttons that are used in the following settings
A
Confirm that the printer is ready to print. Press
the " button.
The Maintenance menu will be displayed.
B
Press the d/u buttons to highlight Head
Cleaning and press the Z button.
C
Select the method for specifying the nozzle
rows for cleaning.
All Nozzles
Inspect the printed pattern and select this
method if all patterns contain faint or missing
areas. If you selected All Nozzles, skip ahead to
Step 5.
Selected Nozzles
Inspect the printed pattern and select this
method if only certain pattern numbers (nozzle
rows) contain faint or missing areas. You can
select multiple nozzle rows.
D
Select nozzle rows for cleaning.
❏ Press the d/u buttons to highlight numbers
corresponding to check patterns with faint or
missing segments and press the Z button to
select.
❏ Once you have selected all the nozzle rows for
head cleaning, highlight Proceed and press the
Z button.
E
Select the cleaning level, then press the Z
button.
At first, use Execute (Light).
F
Head cleaning will be performed.
After performing had cleaning, review the
printed check pattern to confirm that all heads
have been cleaned.
Handling Used
Consumables
The following used parts with adhered ink are
classified as industrial waste.
❏ Cleaning stick
❏ Wiper
❏ Wiper cleaner
❏ Cap cleaning liquid
❏ Ink packs
❏ Waste ink
❏ Waste Ink Bottle
❏ Head Maintenance Kit
❏ Paper after printing
Dispose of items according to local laws and
regulations. For example, contract a industrial waste
disposal company for disposal. In such cases, submit
the “Safety data sheet” to the industrial waste disposal
company.
You can download it at your local Epson Web site.
SC-F6300 Series Operator's Guide
Maintenance
30
To Next Page
Loading...
