11 Rev.7.4
6-5. Configuration Button
This button should be clicked when setting small details such as write conditions.
1) General Configuration
a) Users Level
Customer Default
Distributor Distributor settings
Revision history is saved in a file.
b) Engineer Name
This is necessary when Distributor is selected. (It will be saved as information in a file under product revision.)
ID Enter company name, etc.
Name Enter user name, etc. (Up to 16 names can be entered.)
c) Version
Current hardware and software versions are displayed.
H/W Hardware Version
S/W Software Version
2) Function Check
Displays content of Function Test. (Everything is checked, but these values cannot be changed.)
To Next Page
Loading...