135
Chapter 12
Troubleshooting
12-2 Resetting the system
If operations are unstable, try resetting the system.
Hold down all of the buttons ( , , , and ) for at least
two seconds until the display turns o.
The screen is reset and the time/setting content is cleared.
Measurement data is not cleared.
• After resetting to synchronize the time, perform a GPS search ( P. 24).
• After resetting, the display language is English.
• Stride sensor information is reset after performing a reset. Make the same
preparations as when using the device for the rst time (
P. 59).
• Pairing information for the HR sensor is reset after performing a reset. Perform
pairing for the device in the same way as when using the device for the rst
time (
P. 65).
To Next Page
Loading...