Epson Stlyus Photo 1500W - Page 12

PAGE 4 of 6 >>
Rotech: Epson Stylus Photo 1500W – Installation Guide
WinProle Installation & Registration
8.) You will use the Product ID to register your product. The Product ID is located in the WinProle
Registration window (see FIGURE 12). The easiest and fastest way to obtain a Registration Code
24/7 is by clicking the Obtain Registration Code button, also located in the WinProle Registration
window. Follow the on-screen instructions to receive a Registration Code via an automatic E-mail.
Note: You must have a separate Registration Code for every machine on which the “WinProle” is
installed
7.) As installation nears completion, the following window will prompt you to register your product (see
FIGURE 11). DO NOT SKIP THIS STEP, registration is required to use the software. Click OK to
continue.
FIGURE 7
9.) The following instructions will show how to register On-line. Note the Product ID as this will be
needed during the registration process and click Obtain Registration Code (see FIGURE 8).
FIGURE 8
1
2