Epson Stylus 1500 - Page 121

6.
Refer to the pattern to change the value, within the range 30 to –30, by pressing the ↑ and ↓
keys. Press Enter to write the data to the EEPROM. The printer immediately prints a new
pattern using the input value.
7. Press ENTER to exit the setting mode, or press SPACE to continue making settings.
CAUTION
❒ The settings are not stored permanently in the EEPROM until the printer is turned off.
Turn off the printer at once after adjustment.
❒ Reset protect counter B using the adjustment program to make the printer perform the
initial ink charge operation before sending the unit back to the customer.
8. The menu below appears on the display. If you want end the program, press 5.
Stylus 1500 <********> Customer Data <********> 95/**/**
( Customer Data Input ) .... 1
( Adjustment ) .... 2
( END ) .... 5
SELECT MENU
■
9. Turn off the printer.
Adjustments
4-18 EPSON Stylus 1500 Service Manual