Epson Stylus 1500 - Page 123

7.
Input a value from –30 to 30 to bring C within 0 ± 0.02 mm, as shown in the following
flowchart.
Figure 4-12. Bi-D Adjustment Pattern
C
START
Choose "Bi-D Adj." to enter
the Bi-D adjustment mode.
Print Bi-D pattern.
Is Bi-D OK ?
NO
YES
Misalignment
direction ?
Press up arrow
key.
Press down arrow
key.
Press ENTER key.
All speed OK?
NO
YES
Press ENTER key.
To main menu
Select print speed
Figure 4-13. Bi-D Adjustment Flowchart
Adjustments
4-20 EPSON Stylus 1500 Service Manual