Epson Stylus 1500 - Tools

Tools
This section describes the tools and equipment required for assembling, disassembling, or adjusting
the printer. Use only tools that meet these specifications.
Table 3-1. Tools
Tool Name Type
Part No.
Phillips screwdriver no. 1 O / E B743800400
Phillips screwdriver no. 2 O / E B743800200
Standard screwdriver O / E B743000100
Thickness gauge O / E B776702201
Tweezers O / E B741000100
Wrench (M3) O —
Box driver (7 mm across) O / E B741700200
Torque wrench E B765106901
O: Commercially available
E: EPSON-exclusive
Table 3-2. Equipment Required for Maintenance
Description Specification
Multimeter —
Oscilloscope 50 MHz
Note : An oscilloscope is required only for servicers who repair to the component level.
Disassembly and Assembly
EPSON Stylus 1500 Service Manual 3-5