DE Sensor Removal
1. Remove the upper housing. (See page 3-7.)
2. Disconnect the cable from the connector on the sensor.
3. Remove the sensor from the sub select cam frame. (Insert tweezers to release the hooks
securing the sensor to the sub select cam frame. Then pull the sensor off, as shown in the
figure below.)
Hook for DE Sensor
Tweezers
Sub Select Cam Frame
DE Sensor
DE Sensor Cable
Figure 3-13. Removing the DE Sensor
Disassembly and Assembly
3-16 EPSON Stylus 1500 Service Manual
To Next Page
Loading...
