Revision: 01 13
Table 9: Ink Density vs. CMY Print Mode for Stylus COLOR IIs, Stylus 820
(CMY Print Head and Ink Cartridge Installed)
Resolution Media Type Print mode Limitation of ink duty* Option**
Dot
arrangement,
(Dot size)
a) C, M, or Y ink
b) R,G,B = two inks
c) Black =Three inks
(C+M+Y)
Micro
Weave
High
Speed
(180 dpi) Plain Paper 180 dpi,
(Normal Dot)
a) 100% (255/255)
b) 200% (255/255*2)
c) 300% (255/255*3)
OFF ON
(OFF)
(360 dpi) Plain Paper 360 dpi,
(Normal Dot)
a) 100% (255/255)
b) 200% (255/255*2)
c) 200% (170/255*3)
OFF
(ON**)
ON
(OFF)
Coated Paper
-360 dpi
360 dpi,
(Small Dot)
†
a) 100% (255/255)
b) 160% (204/255*2)
c) 160% (136/255*3)
ON**
(OFF)
OFF
(ON)
Transparency
Film
360 dpi,
(Small Dot)
†
a) 100% (255/255)
b) 160% (204/255*2)
c) 160% (136/255*3)
ON OFF
(360x720dpi) Coated Paper
-720 dpi
360x 720 dpi,
(Small Dot)
†
a) 100% (255/255)
b) 130% (166/255*2)
c) 130% (110/255*3)
ON OFF
(360x720dpi) Glossy Paper 360x 720 dpi,
(Small Dot)
†
a) 100% (255/255)
b) 100% (128/255*2)
c) 100% (85/255*3)
ON OFF
†
Small dot size is selected using “ESC ( e” command.
* These are recommended values only. You may find that other values are more suitable for your driver or
application.
** The parameter within the “( )” indicates a user selectable option. These options are available only
when a choice, “( )”, is indicated. If the user turns MicroWeave “ON”, then High Speed mode (bi-
directional printhead printing) should be disabled for best quality.
To Next Page
Loading...
