6-113
Solving Problems | 113
PAPER SETTING
ERROR
CHECK PAPER
SOURCE IN THE
DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
You are using the wrong
paper path for the type of
paper you’re using.
Check the Paper Source setting in the printer driver, and
load the paper in the correct slot. See “Choosing the
Correct Paper Path” on page 32 and “Choosing Page
Setup Options” on page 50 for Macintosh or “Choosing
Paper and Layout Options” on page 68 for Windows.
PAPER SIZE ERROR
LOAD THE CORRECT
SIZE PAPER
The size of paper you
loaded is not correct for the
document/image you are
printing.
Remove the paper and load media that is the correct
size for what you are printing.
PAPER SKEW
PRESS THE DOWN
BUTTON.
LOAD PAPER
CORRECTLY
The paper is not loaded
straight.
Press the d Paper feed button, and then load the paper
straight. If you are using the auto sheet feeder, you can
use the top edge guide to help feed the paper straight.
See page 37 for details.
Message Explanation Response
sp3800Guide.book Page 113 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
