5-85
Maintaining and Transporting the Printer | 85
3. Click the Nozzle Check icon.
4. Click
Print to print the nozzle check pattern so you can see if the print
head needs to be cleaned. Or click
Auto if you want to run the nozzle
check and have the printer automatically clean the print head if
necessary.
5. Examine the nozzle check pattern to make sure it has no gaps or lines.
• If the printout looks okay as shown below, you’re done. Click
Finish.
• If you see any gaps as shown below, click Clean to clean the print
head and follow the on-screen instructions.
6. If the nozzles do not clear after a few cleaning cycles, run a Power
Cleaning Cycle, as described in the next section.
Note: You must use at
least a 10
× eye loupe to
check the pattern.
sp3800Guide.book Page 85 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
