5-127
Maintaining and Transporting the Printer | 127
Removing the Optional Print Server Card
If you need to exchange or ship your printer, you must remove the Ethernet
card.
1. Turn off the printer and disconnect the power cord.
2. Disconnect the Ethernet cable.
3. Remove the two screws securing the card.
4. Make sure the card is cool before pulling it out of the slot.
WARNING: The card will be
hot after printing. Make sure
you allow the card to cool
before handling it.
sp4800Guide.book Page 127 Tuesday, March 7, 2006 3:49 PM
To Next Page
Loading...
