17
English
Copying
1. Press the one of the Copies/Value buttons to set the number
of copies.
Note:
In the 2-up Copy mode, you cannot set the number of copies.
2. Press the x B&W Copy button to copy in grayscale, or the x
Color Copy button to copy in color. This product starts
copying.
3. In the 2-up Copy mode, place the second document on the
document table, and then press the x B&W Copy button or
the x Color Copy button.
Note:
❏ The copied image may not be exactly the same size as the original.
❏ While copying in progress, if a message appears on the LCD panel
indicating ink is low, you can continue making copies until ink runs
out, or stop making copies and change the appropriate ink cartridge
immediately.
To Next Page
Loading...
