13
4. Load up to 10 envelopes at a time, flap edge left, printable side up, against the
right edge guide.
Note: For best results, press each envelope flat before loading, or load one
envelope at a time.
5. Slide the left edge guide against the envelopes (but not too tightly).
6. Flip the feeder guard back.
Select the following settings when printing on envelopes:
■ Envelope as the paper Type or Media Type setting
■ The correct envelope size as the Size or Paper Size setting
■ Landscape as the Orientation setting
For instructions on selecting these settings, see Printing in Windows.
Load the flap edge left,
printable side up
To Next Page
Loading...
