EasyManua.ls Logo

Epson Stylus Office BX300F Series - Appendix; Important Safety Instructions

Epson Stylus Office BX300F Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix 15
English
Appendix
Important Safety
Instructions
Before using this printer, read and follow
these safety instructions:
Use only the power cord that comes
with the printer. Use of another cord
may cause fire or shock. Do not use the
cord with any another equipment.
Make sure the power cord meets all
relevant local safety standards.
Use only the type of power source
indicated on the label.
Place the printer near a wall outlet
where the power cord can be easily
unplugged.
Do not let the power cord become
damaged or frayed.
Make sure the total ampere rating of
the devices plugged into an extension
cord or a wall outlet does not exceed
the ampere rating limit.
Avoid locations that are subject to
rapid changes in heat or humidity,
shocks or vibrations, dust, or direct
sunlight.
Do not block or cover openings in the
case or insert objects through the slots.
Place the printer on a flat, stable surface
that extends beyond its base in all
directions. It will not operate properly
if it is tilted or at an angle. And make
sure the back of the printer is at least
10 cm away from the wall for sufficient
ventilation.
Do not open the scanner unit while
copying, printing, or scanning.
Do not touch the white flat cable inside
the printer.
Do not spill liquid on the printer.
Do not use aerosol products that
contain flammable gases inside or
around the printer. Doing so may cause
fire.
Except as specifically explained in your
documentation, do not attempt to
service the printer yourself.
Unplug the printer and refer servicing
to qualified service personnel under the
following conditions: if the power cord
or plug is damaged; if liquid has
entered the printer; if the printer has
been dropped or the case damaged; if
the printer does not operate normally
or exhibits a distinct change in
performance.
When storing or transporting the
printer, do not tilt it, stand it on its side,
or turn it upside down; otherwise ink
may leak from the cartridge.
Be careful not to trap your fingers when
closing the scanner unit.
Do not press too hard on the document
table when placing the originals.
Do not place anything except for
originals in the automatic document
feeder.

Other manuals for Epson Stylus Office BX300F Series

Related product manuals