Maintenance
45
Tasmania
shortset.bk Rev. C
A5 size MAINT.FM
10/7/99 Pass 2
R
Proof Sign-off:
K. Nishi _______
N.Nomoto _______
J.Hoadley _______
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see “Replacing an
Old or Damaged Ink Cartridge” in the online
Reference Guide
. If
print quality remains a problem after replacing the ink cartridges,
contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Aligning the Print Head
If you notice a misalignment of vertical lines, you may be able to
solve this problem from your computer using the Print Head
Alignment utility in your printer software.
Note:
Do not start the Print Head Alignment utility while printing is in
progress; otherwise your printout may be marred.
For Windows users
1. Make sure paper is loaded in the sheet feeder.
c
Caution:
Use paper at least 210 mm (8.27 inches) wide; for example,
A4 size paper loaded short edge first. Otherwise, the print
head will spray ink directly onto the platen.
2. Access the printer software window. If you need instructions,
see “Accessing the printer software” in the online Reference
Guide.
3. Click the
Utility
tab, then click the
Print Head Alignment
button.
4. Follow the messages on your screen to align the print head.
To Next Page
Loading...
