Epson Stylus Photo 1200 - Setting up Client Systems

54
Setting Up Client Systems
1. Click
Start
, point to
Settings
, and select
Printers
.
2. Right-click the EPSON Stylus Photo 1200 icon and choose Properties.
3. Click the
Details
tab. You see the following dialog box:
4. Click the Add Port button, then click Browse to specify the network path to the
printer.
To print from DOS applications as well as Windows
applications, click the Capture Printer Port button instead of
Add Port. Select the printer port in the Device list, then
specify its network path. Select Reconnect at logon, then
click OK.
5. When you return to the Details tab, click OK.
Click Add Port, then specify
the network path in the dialog
box that appears
Details tab