#"$
You’re using the
High Speed and
MicroWeave settings
with a misaligned print
head.
Turn off High Speed, following the instructions in Customizing Print
Quality and Special Effects. Then run the Print Head Alignment utility as
described in Aligning the Print Head.
The resolution of your
image may be too low.
If a photographic image looks grainy or rough, try using the
PhotoEnhance3 and Sharpness setting to improve the quality of your
printout. See Customizing Color Settings
for details. You can also
increase the image resolution using your image-editing software, or
decrease the size of the image.
Possible cause Solution
To Next Page
Loading...
