#"$
You see a spooling error message (Windows)
You see a memory error message (Macintosh)
In Windows, the Status Monitor 2 window doesn’t appear
Possible cause Solution
Your hard drive is full. Delete unnecessary files to make room for print job files on the drive.
Your computer doesn’t
have enough memory
to print your file.
Try the following:
◗ Close any open applications, including screen savers and virus scan
programs.
◗ Reduce the resolution of your image.
◗ Select fewer colors or a lower resolution for your display or monitor.
◗ Add more memory to your computer.
Possible cause Solution
You need to increase
the memory allocated
for your application,
EPSON Monitor3, or
both.
Choose Get Info from the File menu when the application is active or
when EPSON Monitor3 is selected and increase the memory allocation.
See Using Monitor3
for more information.
If that doesn’t work, turn off background printing in the Chooser or in your
printer software; see Using Background Printing on the Macintosh
for
instructions. (You won’t be able to use Monitor3.)
Possible cause Solution
You didn’t restart your
computer after
installing Status
Monitor 2.
Click Start, select Shut Down, click Restart the computer, and click
Yes to restart your computer. Then try using Status Monitor 2.
To Next Page
Loading...
