#"$
Printing is too slow
Bidirectional support is
not enabled.
Click Start, select Settings, and click Printers. Right-click the EPSON
Stylus Photo 1200 icon and select Properties. Click the Details tab,
then click the Spool Settings button. Click the Enable bi-directional
support for this printer radio button to turn on bidirectional support.
Click OK twice, then close the Printers window and try printing again.
You’re using
ScanDisk.
Before using ScanDisk, turn off background monitoring in Status
Monitor 2. (See Turning on Background Monitoring
for instructions.)
Then turn it back on when you’re finished using ScanDisk.
Possible cause Solution
Your printer software
options are set
incorrectly.
For the fastest printing, try the following printer software settings:
◗ Set Print Quality to Economy
◗ Turn MicroWeave off
◗ Turn High Speed on
◗ Choose Black ink
See Custom Printing
for instructions.
Your system doesn’t
have enough
resources.
◗ Clear space on your hard disk or run a defragmentation utility.
◗ Don’t run too many applications at the same time.
◗ Turn off virtual memory.
◗ Increase your system’s memory (RAM) and/or processor speed.
Possible cause Solution
To Next Page
Loading...
