The type of paper you choose determines the print quality (resolution)
you can use. It’s very important to select the correct setting for your
paper. If you’re not sure which to choose, see Selecting the Right
Settings for Your Paper.
5 Choose Color or Black ink.
6 Now make sure the Mode option is set to Automatic. This is the
easiest way to get good printing results for all kinds of documents, on
all types of paper.
7 Set the slider to Quality or Speed. This lets you choose between the
fastest printing or a high resolution for the paper you’re using.
To select 1440 dpi or any other available resolution for your paper, you
need to access the Advanced dialog box; see Customizing Print
Quality and Special Effects for instructions.
8 Click the Paper tab and choose your paper size, paper source,
number of copies, orientation, and printable area settings. See
Selecting Paper Options in Windows
for instructions.
9 Click the Layout tab and check the reduce/enlarge, page layout, and
watermark settings. See Choosing Print Layout Options in Windows
for details.
10 Click OK when you’re finished checking your settings. The dialog box
closes. Click OK until you see the Print dialog box.
11 In the Print dialog box, click OK or Print.
While your document is printing, a window appears showing the printer
status and the progress of your print job. See Checking Printer Status
for more information.
The Quality/Speed
slider is not available
for certain paper
types.
To Next Page
Loading...
