Epson Stylus Photo 1500W - J O B N a Me S E T J H N L N H 0 0 H M1 M2 M3 M4 M5 < J O B N a Me

2013/Feb/08
Revision: 1 Page: 56
6.1.6. Job name set “JH” nL nH 00H m1 m2 m3 m4 m5 <job name>
[Format]
“JH” nL nH 00H m1 m2 m3 m4 m5 <job name>
nL = (length of <job name> ) + 6
nH = 00H
[Parameters]
The parameter “m1” is one byte binary data that indicates job name information kinds.
The parameters “m2”,”m3”,”m4”,”m5” are each one byte binary data that indicates Job ID.
“<job name>” is maximum 32 bytes binary codes that describe a job name.
m1=00h;<job name>=Host name(Max 32byte)
m1=01h:<job name>=Product ID
m1=02h:<job name>=Document name
m1=03h:<job name>=User name
[Function]
Set the job name of the job specified by “JS”command.
This command is available only in Remote.