Epson Stylus Photo 1500W - U S E R S E T T I N G U S 0 3 H 0 0 H 0 0 H M1 M2

2013/Feb/08
Revision: 1 Page: 61
6.1.10. User Setting “US” 03H 00H 00H m1 m2
[Format]
“US” 03H 00H 00H m1 m2
[Parameters]
The parameter “m1” , “m2” are each one byte binary data that indicates shown as below.
“m1” Item “m2” Setting
00H Bottom margin setting 00H 0 =Standard
01H 1= Max
02H 2=Borderless
01H Platengapsetting 00H Normal
01H Platen gapsetting1
02H Platen gapsetting2
: :
FFH Platengap setting 255
02H Data cutflaginformation 00H No cut
01H Cut
03H-FFH Reserved
[Function]
Select a printer setting shown upper to the temporary default.
The previous setting will be kept if the parameters are out of range.
This command is available only in Remote.