Epson Stylus Photo 1500W - S E L E C T P a P E R P a T H P P 0 3 H 0 0 H 0 0 H M1 M2

2013/Feb/08
Revision: 1 Page: 63
6.1.12. Select paper path “PP” 03H 00H 00H m1 m2
[Format]
“PP” 03H 00H 00H m1 m2
[Parameters]
The parameter “m1” and “m2” are each one byte binary data.
The “m1” describes paper is continuous type or a single sheet in CSF or a manual inserted sheet as shown
below.
Paper m1 m2
ASF 01H FFH
Reserved 02H 00H
CD-R 02H 01H
[Function]
Select paper path to be used for the temporary default.
The previous setting will be kept if the parameter “m1” and “m2” exceeds its limit.
This command is available only in Remote.