Epson Stylus Photo 2100 - Page 99

EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Troubleshooting 99
At power-on At power-on, the ASF hopper
does not produce operating sound
or the ASF hopper makes gearing
sound and remains stopped.
ASF unit 1. Check that the two ribs and one joggle of the ASF unit engage
with the notches of the Frame.
2. Check that the Hopper has not come off the ASF unit.
1. Reinstall the ASF unit to the printer.
2. Install the Hopper correctly.
Table 3-17. Phenomenon-Based Fatal Error Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
Rib
Rib
Joggle
Rear right
side