Epson Stylus Photo 750 - Page 67

EPSON Stylus Photo 750 Revision A
Disassembly and Assembly Disassembly 62
Figure 4-10. Component Parts of “Pump, Assembly”
Figure 4-11. Ink Tube
CHECK
PO INT
„
Since there is a spring inside the pump assembly,
be careful of the spring popping out.
„
When assembling, be careful not to pinch or give
pressure to the ink tube, which is connected
between “Pump, Assembly” and “Cap, Assembly”.
„
After installing the “Pump, Assembly”, rotate the
“Gear, 67.2” and check if the cleaner part moves
back and forth. (At this time, hold the “Cap,
Assembly” toward the right direction of the frame”)
C leaner, H ead
Pum p C om ponents
Assem bly O rder
OK
NG
View ed from front
(Ink tube goes behind of
the cap assem bly)
(The ink tube is on the part of
the cap assem bly)
Ink Tube R outing