!"
4 Select the following configuration options:
◗ Error notification lets you select whether you want your system to
beep and display error message text or just display text if your
printer encounters an error.
◗ Warning lets you choose whether warning messages beep and
display text or just display text.
◗ Temporary Spool folder and Temporary High Speed Copies
folder let you select the folders on your hard disk that store the
temporary print job and high speed multiple-copy print job files
created when you send a job to the printer. Click the Select button
to change to a different folder.
◗ Click the Check for errors before starting to print checkbox if you
want your software to check for errors before starting your print job.
◗ Click the Check the ink level before starting to print checkbox if
you want your software to check for a low ink condition before
starting your print job.
5 When you’ve finished changing your configuration options, click OK to
return to the Utility menu.
Warning messages,
such as low ink, allow
printing to continue;
error messages are
more serious and
cause printing to stop.
To Next Page
Loading...
