#"$
)# " .
If you have trouble with your printer software, first check that your printer
is selected as the Windows default printer or as the current printer in the
Macintosh Chooser.
If you still have problems with your printer software,
check these solutions:
The printer software you installed with Windows 95 doesn’t work correctly after you
upgrade to Windows 98
While installing your printer software, you see the New Hardware Found window
Possible cause Solution
Your printer software
isn’t set up correctly for
Windows 98.
Uninstall the printer software after installing Windows 98, as described in
the
Printer Basics
book. Then reinstall it as described in the
Start Here
card.
Possible cause Solution
Windows has detected
your printer.
If you connected your printer using the parallel port, click Cancel.
Never
select any other option on the New Hardware Found window
.
If you connected your printer using the USB port, see the
Start Here
card for printer software installation instructions using Windows
plug-and-play.
To Next Page
Loading...
