When you want to make the printed size of a document different from its
original size, you can use your printer software’s Reduce/Enlarge
settings. You can make the document fit into the printable area on a
selected paper size or you can choose to reduce or enlarge it to a
selected percentage of its original size.
Follow these steps to reduce or enlarge your document size:
1 Create your document in your application software.
2 Follow the steps in Printing from Windows to access the printer
settings dialog box, then click the Paper tab.
3 Click the Paper Size list and select your document’s size as
determined by your application.
4 If the Paper Size setting you selected is
within
the maximum paper
size that can fit on your printer, but you want to
enlarge or reduce
the
document, go to step 5.
If the Paper Size setting you selected is
larger
than the maximum size
that can be printed on your printer, you see the following dialog box:
Output Paper
list
To Next Page
Loading...
