!'
You can load up to 10 envelopes flap edge first, with the printable side up,
as shown below:
When you print on envelopes or other thick media, set the paper
thickness lever to the + position as shown below. (Return the lever to
the 0 position before printing on regular media.)
Select Plain paper as the Media Type and choose the correct envelope
size as the Paper Size setting in the printer software.
If the stack of
envelopes is more
than 0.4-inch
(10 mm) thick, press
the envelope edges
to flatten them before
stacking or load one
envelope at a time.
To Next Page
Loading...
