EPSON Stylus Photo 925 Revision A
Disassembly and Assembly Disassembly 113
Figure 4-84. Removing the Paper Guide Top
10. Turn the left bush to unlock the PF Roller from the Main Frame.
Figure 4-85. Unlock the PF Roller by turning the Left Bush
11. Position the left bush of the PF Roller in the cut area of the Main Frame as shown
below, and pull off the PF Roller, together with the left bush, to the left.
((Actually, PF Roller Gear is mounted))
Figure 4-86. Removing the PF Roller
Paper Guide Top
OHP Sheet
Bush
PF roller
T To fasten the PF Roller to the Main Frame, fit the projection of
the left bush in the cut hole of the frame while pressing the right
side of the PF Roller.
Figure 4-87. Installing the PF Roller
PF Roller Gear
PF roller
To Next Page
Loading...
