EPSON Stylus Photo 925 Revision A
Adjustment Adjustment Program 127
3. If the lines on the print result of the Bi-D adjustment pattern are out of alignment as
shown below, you must make the adjustment again.
Figure 5-16. Bi-D adjustment pattern
4. If adjustments are necessary, click on the [Previous] button to return to the previous
screen, select [Input Bi-D adjustment value] and enter the required adjustment value.
Figure 5-17. Input Bi-D adjustment value
5. If you select “Checking present Bi-D parameter”, you can check the Bi-D adjusted
value which have been input.
Figure 5-18. Checking the adjusted value
To Next Page
Loading...
