Epson Stylus Photo 925 - Specifications; Physical Specification; Printing Specifications; Paper Feeding

EPSON Stylus Photo 925 Revision A
PRODUCT DESCRIPTION SPECIFICATIONS 13
1.2 SPECIFICATIONS
This section describes specifications of the printer.
1.2.1 Physical Specification
V Weight: 6.4 kg (with paper support and roll paper folder installed)
V Dimension
T Storage: 492 mm (W) x 290 mm (D) x 228 mm (H)
T Printing: 492 mm (W) x 595 mm (D) x 310 mm (H)
1.2.2 Printing Specifications
V Printing Method
T On demand ink jet
V Nozzle Configuration
T Monochrome 48 nozzles
T Color 48 nozzles x 5
(Cyan, Magenta, Yellow, Light cyan, Light magenta)
V Printing Direction
T Bi-direction with logic seeking
V Printing Speed & Printable Columns
* This value represents the speed of normal-dot printing.
V Control Code
T ESC/P Raster command
T EPSON Remote command
V Character Tables
T 1 international character sets
PC 437(US, Standard Europe)
V Typeface
T Bit map LQ font
EPSON Courier 10 CPI
1.2.3 Paper Feeding
V Feeding Method
T Friction feed with ASF
V Paper Path
T Cut-sheet ASF (Top entry Front out)
V Feed Speed
T 150m/sec (10.16 mm feed)
T 4.5 inches/sec (Fast, continuous feed)
1.2.4 General Specifications for Cutter Mechanism
V Cutting method: Fixed cutting edge + movable rotary blade
V Cutting direction: Unidirectional from 80th column side to 0th column
side
V Cutting time: 3 seconds or shorter
V Effective cutting length: 210 mm (A4)
V Max. paper width: 215.9 mm (Letter)
V Min. cutting length: 15mm excluding cutting at the front end or tail end
V Cutting operation: Automatic cutting, or manual cutting by panel switch
1.2.5 Input Data Buffer
T 32 Kbytes
Table 1-1. Character Mode
Character Quality
Level
Character Pitch Printable Columns LQ speed
High quality 10 CPI (Pica) 82 238 CPS*
Table 1-2. Raster Graphics Mode
Horizontal resolution Printable area Available dot CR Speed
360 dpi 8.26 inches 2976 23.8 IPS
720 dpi 8.26 inches 5952 20 IPS
1440 dpi 8.26 inches 11904 20 IPS