26 Printing Without a Computer
10. When you’re done, your list of selected photos is displayed. (If you’ve selected four or
more photos, use the button to scroll up and view the rest of them.)
Note: If you made a mistake and selected the wrong photo, you can remove it
from the list of selected photos. Simply change its number of copies to zero; see
step 7. (Do not press Cancel, or all your settings will be canceled.)
11. Use the button to highlight Close, then press . Your photos are selected for
printing.
12. Continue with “Printing Your Selected Photos” on page 27 to finish laying out your
photos and setting up your print job.
Using DPOF to Select Your Photos
If your camera supports DPOF (Digital Print Order Format),
you can use it to select photos for printing; see your camera’s
instruction manual for details. When you connect your camera
or insert its memory card,
DPOF automatically displays as the
Print Mode. Your photos and the number of copies you want to
print are already selected.
To print, continue with “Printing Your Selected Photos” on page 27 to finish laying out your
photos and setting up your print job.
If you don’t want to use DPOF, you can turn it off by selecting a different Print Mode.
(Press the
Cancel button; this clears any current settings and automatically highlights
Print Mode. Press the Select button, then use the and buttons to highlight the
Print Mode you want to use. Press to activate it.)
Pbasics.book Page 26 Wednesday, April 23, 2003 4:30 PM
To Next Page
Loading...
