Using PRINT Image Matching 79
9. Follow the steps in the next section to print your P.I.M. image.
To keep the P.I.M. header information intact for use in other P.I.M.-enabled programs, keep
the original file; don’t use the Photoshop
Save command. Instead use Save As to rename the
file. It won’t contain P.I.M. header information, but will retain P.I.M. image quality, as long as
the file is saved with the ICC profile embedded.
Note: If you overwrite your original file, you will lose all P.I.M. header information.
Printing a P.I.M. Image
P.I.M. images are converted into the EPSON RGB 2001 color space. To retain P.I.M. quality
and enhancements, don’t change the color space.
Note: The illustrations in the sections below show Macintosh screens; Windows
screens will look different, but the settings are the same.
1. Open the File menu, then:
Photoshop 7.0 or Elements: Select
Print Preview > Print Options, or Print with
Preview
. Then click Show More Options > Color Management.
Photoshop 6.0: Select
Print.
You see one of these windows:
2. In the Source Space box, make sure the EPSON RGB 2001 option is selected.
3. In the Print Space box, select the
Stylus Photo 925 profile for the paper you’re printing
on. We recommend Perceptual as the Intent setting.
Make sure this source is selected
Select the profile for your printer and paper
Photoshop 7.0/Elements Photoshop 6.0
Select your paper type
Pbasics.book Page 79 Wednesday, April 23, 2003 4:30 PM
To Next Page
Loading...
