44
Time
This setting is to print the time information contained in your
photo data. By default, the setting is None.
Print examples when the photo data includes the time
information of 10:00 p.m.
Photo Information
If your photo data contains the photo information conforms to
Exif standard, the information can be printed with this setting.
Following information will be printed:
Exposure time/Shutter speed (Exposure time takes precedence if
both values exist. ex. 1/30s)
F number (ex. F2.8)
ISO speed rate (ex. ISO100)
By default, the setting is Off.
None Does not print and time information.
12-hour system 10:00
24-hour system 22:00
On Prints photo information.
Off Does not print any photo information.
To Next Page
Loading...
