53
English
❏ Automatic Correction in Advanced Settings
❏ Enhancement in Advanced Settings
❏ Brightness in Advanced Settings
❏ Saturation in Advanced Settings
❏ Sharpness in Advanced Settings
Note:
❏ You cannot store or load the settings when an error occurs, printing
the nozzle check pattern and cleaning the print head.
❏ You cannot store the settings for Automatic Correction,
Enhancement, Brightness, Saturation and Sharpness when
All is set as Photo Number in Advanced Settings.
Follow the steps below to store the settings on the LCD panel to
the Custom buttons.
1. Make the settings that you want use.
2. Press the Custom 1 or Custom 2 button for more than two
seconds. The message “The present settings have been saved
as Custom 1 (or Custom 2)” is displayed in the LCD panel.
If you want to load the stored settings, press the Custom 1 or
Custom 2 button.
To Next Page
Loading...
