70
Note:
❏ Before adjusting the cutter position, it is necessary to turn the
printer on and set the roll paper.
See for more details about roll paper setting.
❏ To maintain a precise cutting position, we recommended to adjust
the cutting position each time you change the type or size (width)
of roll paper.
Using the control panel
1. Press the ( maintenance button to display the Advanced
Settings menu.
2. Press the d button to position the cursor at the Cutting
Position Adjustment and press the Select button.
3. Check that the roll paper is set and press the Custom 1 button.
The cutting position adjustment pattern is printed out, and
the roll paper is automatically cut.
4. Look at the cutting position adjustment pattern and find the
number for which the color boundary is cut with the highest
precision.
5. Press the u or d buttons to position the cursor at the number
identified in step 4, and press the Select button.
To Next Page
Loading...
