EasyManua.ls Logo

Epson Stylus Photo 925 - Maintenance; Checking Printer Condition and Maintaining; Checking the Print Head Nozzles

Epson Stylus Photo 925
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
c
Caution:
You must remove the yellow tape seal from the cartridge
before installing it, or the cartridge will become unusable
and you will be unable to print.
If you have installed an ink cartridge without removing
the yellow tape seal, you must remove the cartridge and
install a new one. Prepare the new cartridge by removing
the yellow tape seal, then install it in the printer.
Do not remove the blue portion of the tape seal from the
top of the cartridge, or the print head may become clogged
and be unable to print.
Do not remove the tape seal from the bottom of the
cartridge or the ink will leak.
Do not remove the green IC chip from the side of the
cartridge. If you install an ink cartridge without an IC
chip, the printer may be damaged.
Do not touch the green IC chip on the side of the
cartridge, or normal operation and printing may not be
possible.
Do not touch this part.

Table of Contents

Other manuals for Epson Stylus Photo 925

Related product manuals