5
Important Safety Instructions
Make sure the power cord 
meets all relevant local safety 
standards.
Place the printer near a wall 
outlet where the power cord 
can be easily unplugged.
Use only the power cord that 
comes with the printer. Use of 
another cord may cause re or 
shock. Do not use the cord with 
any other equipment.
Use only the type of power 
source indicated on the label.
Do not let the power cord 
become damaged or frayed.
Do not open the scanner unit 
while copying, printing, or 
scanning.
Do not use aerosol products 
that contain ammable gases 
inside or around the printer. 
Doing so may cause re.
Except as specically explained 
in your documentation, do not 
attempt to service the printer 
yourself.
Keep ink cartridges out of the 
reach of children and do not 
drink the ink.
If ink gets on your skin, wash 
it o with soap and water. If it 
gets in your eyes, ush them 
immediately with water. If 
you still have discomfort or 
vision problems, see a doctor 
immediately.
Do not shake ink cartridges 
after opening their packages; 
this can cause leakage.
If you remove an ink cartridge 
for later use, protect the ink 
supply area from dirt and 
dust and store it in the same 
environment as the printer. Do 
not touch the ink supply port 
or surrounding area.