Epson Stylus Photo R1800 - Removing the Ink System Unit; Installing the Paper EJ Lock Release Cam; Reinstalling the Ink System Unit

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 111
8. Remove the Ink System Unit downwards from the Main Frame keeping the
Unit from coming in contact with the Paper EJ Transmission Lock Lever.
Figure 4-101. Removing the Ink System Unit
 When the Ink System Unit is removed from the Printer
Mechanism, the Paper EJ Lock Release Cam may drop
off. In such case, correctly install it referring to the figure
below.
Figure 4-102. Installing the Paper EJ Lock Release Cam
Paper EJ
Transmission
Lock Lever
Ink System Unit
Paper EJ Lock Release Cam
 Place the Paper EJ Lock Release Cam on the rear side of
the Paper EJ Transmission Lock Lever.
Figure 4-103. Reinstalling the Ink System Unit (1)
 Align the positioning hole on the Main Frame with the
Guide Pin on the Ink System Unit.
Figure 4-104. Reinstalling the Ink System Unit (2)
Paper EJ Lock Release Cam
Paper EJ Transmission
Paper EJ Transmission Lock Lever
Positioning Hole
Guide Pin