Epson Stylus Photo R1800 - Front Paper Guide and Paper Eject Roller; Removing the EJ Grounding Spring; Reinstalling the EJ Grounding Spring

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 116
4.2.6.12 Front Paper Guide and Paper eject roller
1. Remove the Printer Mechanism. See Section 4.2.1.5 on page 78.
2. Remove the Paper EJ Frame Assy. See Section 4.2.6.6 on page 105.
3. Release the Carriage lock, and move the Carriage Unit to the center. See
Section 4.2.1.3 on page 75.
4. Remove the EJ Grounding Spring from the Main Frame with tweezers.
Figure 4-114. Removing the EJ Grounding Spring
A D J U S T M E N T
R E Q U I R E D
After replacing the following part, be sure to apply G-26 grease
to the specified area. See Figure 6-9 on page 177.
 Upper Paper Guide Assy
Referring to Figure 4-115., correctly install the EJ Grounding
Spring.
Figure 4-115. Reinstalling the EJ Grounding Spring
EJ Grounding
Spring